Curved arm Chicken Drinking Bowl

Product Overview

The curved-arm chicken drinking bowl is a one-piece molded cup joined to a bent support arm. The sample photo shows two arms, one red and one orange, each ending in a round clamp hole that slides over a horizontal drinking pipe. The curved shape of the arm places the bowl a small distance below the pipe, so a bird can drink without bumping its head on the pipe above. This makes the arm style a practical choice when the drinking line has to run tight against a cage wall.

Unlike a flat bracket block, the curved arm wraps below the pipe and lets the bowl hang at a natural angle. The bowl itself is a half-open rounded shell with a smooth inner floor. Water reaches the bowl through the nipple inside the arm clamp, and birds peck the nipple to release a drop into the cup. The arm design works on brood houses, breeder pens and free-range shelters where the drinking line is supported by clamps rather than wall brackets.

Key Features and Benefits

• Curved support arm - The bent arm positions the bowl just under the pipe, giving the birds head room and a clear drinking angle.
• Clamp hole fitting - The round hole at the top of the arm slides over a standard drinking pipe, so no drilling is needed on the pipe itself.
• Two shell colors - Red and orange arms are both available, letting farms mark different pens or batches by color.
• One-piece molding - Bowl and arm are molded together, which removes a joint that could crack or leak.
• Smooth inner floor - The rounded bowl bottom rinses quickly and discourages slime buildup between weekly washes.
• Light and nestable - The light plastic arms pack closely together, keeping shipping cost low for distributors.

Technical Specifications

• Product name: curved-arm chicken drinking bowl
• Arm colors: red and orange available
• Mounting: clamp hole at the top of the curved arm
• Structure: one-piece molded bowl and support arm
• Material: injection-molded plastic
• Typical use: clamped horizontal drinking lines in poultry houses

Materials and Quality

The arm and bowl are molded as a single part in rigid plastic, so there is no glued or welded seam to fail. The clamp hole is formed by the mold, which keeps its round shape after repeated sliding onto and off the pipe. The red and orange colors are mixed into the plastic rather than sprayed, which keeps the arm bright after long use. Before packing, we check that the clamp hole slides easily on a standard pipe and that the arm flexes without cracking, because a brittle arm will snap when the line is raised or lowered. The red and orange arms are packed in bags, with each arm nested inside the next to save space during shipping.

How to Use and Maintain

Slide the clamp hole of the curved arm over a horizontal drinking pipe at the spacing your flock needs. Attach the nipple fitting inside the clamp so the released water falls into the bowl below. Test with a small flow of water and adjust the spacing if the birds cannot reach comfortably. Each week, lift the arm off the pipe, rinse the bowl with clean water, and wipe the nipple pin with a soft cloth. If the clamp hole becomes loose on the pipe, check the pipe diameter, because a worn arm should be replaced rather than wrapped with tape.

Applications

Curved-arm bowls are a favorite in breeder houses, where the drinking line runs close to the wall and the bowl needs to hang just below it. The arm also suits temporary drinking lines set up for poultry shows, vaccination teams and summer shelters, because the whole line can be taken down and moved in minutes. Free-range farmers like the clamp system because they can add extra drinkers between existing ones without rebuilding the line.

Distributors stock these arms as a low-cost spare for farms that already run nipple lines. The arms nest together in a bag, which makes them easy to sell in small shops and market stalls. Mixed red and orange packs help retailers offer a choice without holding several separate SKUs, and the one-piece design means fewer replacement parts to manage after the sale.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this drinker, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: What pipe diameter does the clamp hole fit?

The clamp hole is sized for standard horizontal drinking pipes used in cage and floor systems. If your pipe is a non-standard size, send us the measurement and we will confirm the fit before shipment.

Q2: Is the nipple included with the arm?

The arm and bowl are shown as a one-piece molded part. The nipple fitting is added inside the clamp during installation, and we supply matching nipples on request.

Q3: Can I bend the arm to fit a different angle?

The arm is molded rigid. Do not heat or bend it, because that weakens the plastic. If your line needs a different drop distance, tell us the required measurement and we will check our arm range.

Q4: How should I clean the arm after a disease outbreak?

Remove the arms from the pipe, wash off organic matter, then soak in a recommended poultry disinfectant before rinsing and refitting. Replace any arm that becomes cloudy or cracked after disinfection.