Chicken Drinking Bowl

Product Overview

The one-piece red chicken drinking bowl is shown with its printed dimensions on the product drawing: the bowl is about 6 cm long, 4 cm high and roughly 6.5 cm deep along the inside curve, the rear bracket block measures about 3.5 cm tall by 2.7 cm wide, and each bowl weighs about 18 g. These numbers come directly from the mold and let buyers compare the cup size with their existing drinkers before ordering. The shell is a smooth red molded cup joined to a square bracket block that carries the black nipple connector.

The one-piece design means bowl and bracket block are molded together, so there is no glued seam to fail when the birds peck the nipple. The cup sits below the horizontal nipple, and each bird's beak triggers a small drop of water into the bowl. The low water level keeps the supply fresh and limits waste to the drops caught by the cup. This listing covers one assembled bowl, bracket block and nipple connector, and the printed size makes it a reliable replacement part for automatic drinking lines.

Key Features and Benefits

• Printed size reference - The 6 cm by 4 cm bowl and 18 g weight let buyers confirm the cup size against their current drinkers before ordering.
• One-piece molding - Bowl and bracket block are molded together, which removes a joint that could crack or leak after months of pecking.
• Nipple-triggered refill - Birds release the water themselves, so the cup stays filled without wasting water in an open tray.
• Bracket block dimensions - The 3.5 cm by 2.7 cm block sits flat against a wall or cage frame, keeping the bowl level and steady.
• Light 18 g cup - The light plastic shell is easy to hang, remove and rinse during daily cleaning routines.
• Rounded inner floor - The smooth curved bottom rinses quickly and avoids dead corners where slime can build up.

Technical Specifications

• Product name: one-piece chicken drinking bowl
• Weight: approx. 18 g per piece
• Bowl length: approx. 6 cm
• Bowl height: approx. 4 cm
• Inside bowl depth: approx. 6.5 cm along the curve
• Bracket block size: approx. 3.5 cm tall by 2.7 cm wide
• Body color: red molded plastic
• Fitting: black nipple connector at the bracket outlet

Materials and Quality

The red shell is molded in plastic pigmented in the mass, so the bright surface stays glossy after months of washing. The bracket block is a firmer plastic that carries the nipple outlet, and the black nipple housing is reinforced around the threads. We check that the 18 g cup feels rigid without being brittle, because a shell that cracks when frozen water expands in winter is the most common warranty claim. Sample bowls are assembled, fitted to a test pipe and run with a short water check, confirming that the nipple opens lightly and closes without weeping.

How to Use and Maintain

Hang the bowl on a wall rail, cage wire or short pipe at a height the birds can reach comfortably. Screw the black nipple into the bracket outlet until the washer seals. Run the water in gently and watch the first few drops fall into the center of the 6 cm bowl. Weekly, unclip the bowl, rinse it with clean water, and wipe the nipple pin with a soft cloth. If the cup becomes stained, soak it in a mild disinfectant solution, then rinse well before refitting. Replace the bowl if the shell cracks or the bracket block becomes loose on the wall.

Applications

This printed-size bowl is a natural replacement part for layer cages, breeding pens and grow-out houses that already run nipple lines. The exact 18 g weight and 6 cm bowl size make it easy to confirm a match, so maintenance staff can order spares without guessing. Free-range growers also use these cups in sheltered drinking stations, where the low water level keeps the supply fresh between daily visits.

Distributors stock this bowl because the printed dimensions simplify the listing and reduce customer questions about cup size. The light 18 g shell packs densely, which keeps freight cost low, and the one-piece design means fewer parts to manage after the sale. Hatcheries recommend the bowl to new customers, because the clear size reference makes the trial order easy to plan.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this drinker, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: Are the dimensions printed on the drawing measured from the outside?

The 6 cm length and 4 cm height are the outer dimensions of the bowl, and the 6.5 cm figure follows the inside curve. Use these as a reference when comparing with your existing drinkers.

Q2: Does the bowl fit my existing nipple line?

The bracket outlet is designed for standard horizontal nipple lines. If your fitting is non-standard, send us a photo and we will confirm the match before shipment.

Q3: What causes slow dripping from the nipple?

Common causes are grit trapped inside the nipple pin, a worn seal, or water pressure that is too high. Flush the line first, then lower the regulator setting before replacing the nipple.

Q4: Can I order a sample batch before a full container?

Yes. We support trial orders and mixed container loads. Send us your target quantity and destination port, and our sales team will reply with unit pricing, packing details and lead time.