Red Chicken Drinking Bowl Kit

Product Overview

The red chicken drinking bowl kit is photographed as four assembled cups laid out in a fan, each one a deep red shell joined to a white elbow fitting. The small inset photo shows the same cups already fitted on the front of a layer cage, with two hens leaning down to drink. This view matters to commercial buyers, because it shows how the kit looks once installed rather than only on a white background. The red shells stand out clearly against the grey cage wire, which helps the stockman spot a blocked or leaking cup during the daily walk-through.

Each cup is a rounded molded shell with a smooth inner floor. The white elbow sits between the horizontal drinking pipe and the bowl, holding the nipple outlet just above the cup center. When a hen pecks the nipple, a small drop falls into the red bowl below, and the cup refills itself without an open tray. The four-cup pack is sized for a short section of cage front, and extra elbows can be added later when the house is extended. This listing covers four red bowls with four white elbow fittings and four nipple outlets.

Key Features and Benefits

• Four-cup cage pack - The pack covers a short row of layer cages, so a farmer can equip one section without ordering loose parts.
• Red shells for inspection - The bright red cups show up against grey wire and pale bedding, so a blocked nipple is spotted at a distance.
• White elbow between pipe and bowl - The elbow lifts the cup below the pipe, leaving head room for the hen to drink without bumping its comb.
• Nipple-triggered refill - Hens release the water themselves, which keeps the supply fresh and limits waste to the drops caught by the bowl.
• Smooth rounded inner floor - The glossy curved bottom rinses quickly and avoids dead corners where slime can form between weekly washes.
• Extra elbows available - The elbow is a standard part, so the same pack can be expanded by adding more cups to the same pipe.

Technical Specifications

• Product name: red chicken drinking bowl kit
• Pack contents: four red bowls and four white elbow fittings
• Bowl color: red
• Fitting: white elbow block with nipple outlet
• Material: injection-molded plastic
• Typical use: layer cage fronts, breeder pens and small commercial drinking lines

Materials and Quality

The red shells are molded in plastic pigmented in the mass, so the bright surface stays glossy after months of washing and sun. The white elbow block uses a firmer grade that keeps its shape when clipped around the pipe, and the nipple outlet inside the block is checked on each sample for a smooth pin movement. We inspect the bowl rims for mold flash, because a rough edge could injure a hen's beak. Sample packs are assembled on a test cage front and run with a short water check, confirming that each elbow holds its angle and that the nipples close without weeping.

How to Use and Maintain

Measure the cage front first, then clip the white elbows onto the horizontal pipe at one point per cage. Push the red bowl into the elbow holder until it seats, and fit the nipple outlet above the cup center. Run the water in slowly and watch the first drops land in the middle of each bowl. Once a week, lift the red bowls off the elbows, rinse them under clean water, and wipe the nipple pins with a soft cloth. Because the shells are bright red, the stockman can count the cups at a glance during inspection and confirm that none has cracked or slipped.

Applications

This four-cup kit is a natural choice for commercial layer houses that run a nipple line along the cage front. The pack size matches a short cage row, and the red shells make the drinking points easy to check during the daily round. Breeder pens also use the kit, because the elbow keeps the bowl inside the cage reach without blocking the nest boxes below. Small commercial farms like the pack because it arrives ready to install, with no separate brackets or clips to hunt for.

Distributors stock the red kit as a fast-moving cage-house consumable, because cracked shells are replaced every rearing cycle. The four-cup pack sells well to small farms that only need a short row, and the same elbows fit the larger bowl sizes when the house upgrades. Hatcheries recommend the kit to new layer farmers, because the inset photo shows exactly how the cups sit on a cage front, which reduces follow-up questions about installation.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this drinker, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: How many cups do I need for one cage row?

A common spacing is one drinking point per cage on the front line. Count your cages, then order one extra pack as spares, because shells crack when hens peck them or when frozen water expands in winter.

Q2: Can I buy only the red shells as replacements?

Yes. The elbow and nipple are standard parts, so we can supply only the red shells for farms that already have the fittings on the wall. Tell us how many shells you need and we will price them.

Q3: What if the elbow does not fit my cage pipe?

Send us a photo of your pipe and the fitting you currently use. We will confirm whether the standard elbow matches, or suggest the correct adapter for your system.

Q4: How do I clean the cups after a vaccination round?

Lift the red bowls off the elbows, wash off organic matter, then soak in a recommended poultry disinfectant before rinsing and refitting. Replace any bowl that becomes cloudy or cracked after disinfection.