One piece Chicken Drinking Bowl

Product Overview

The one-piece chicken drinking bowl is shown with its printed dimensions: the bowl measures about 6 cm long and 4 cm high, the inside curve is roughly 6.5 cm deep, the bracket block is about 3.5 cm by 2.7 cm, and the whole cup weighs about 18 g. The key point of this listing is the construction: the drinking cup and the bracket block are molded as one piece, so there is no separate block to clip on, and no glued seam to fail when the birds peck the nipple. The shell is a smooth red molded cup, and the black nipple screws into the outlet at the bracket end.

The one-piece design suits farms that want a durable, low-maintenance drinking point. Birds peck the horizontal nipple, a small drop falls into the bowl below, and the cup refills automatically. Because the bowl and bracket are a single molded part, the joint stays sealed even after months of daily use. This listing covers one assembled bowl with the black nipple connector, and the printed size makes it a reliable replacement for existing automatic drinking lines.

Key Features and Benefits

• One-piece molding - Bowl and bracket are molded together, which removes a joint that could crack or leak after months of pecking.
• Printed size reference - The 6 cm by 4 cm bowl and 18 g weight let buyers confirm the cup size against their current drinkers before ordering.
• Nipple-triggered refill - Birds release the water themselves, so the cup stays filled without wasting water in an open tray.
• Light 18 g cup - The light plastic shell is easy to hang, remove and rinse during daily cleaning routines.
• Rounded inner floor - The smooth curved bottom rinses quickly and avoids dead corners where slime can build up.
• Standard nipple outlet - The black nipple fits most horizontal drinking lines, making the bowl an easy replacement on existing systems.

Technical Specifications

• Product name: one-piece chicken drinking bowl
• Weight: approx. 18 g per piece
• Bowl length: approx. 6 cm
• Bowl height: approx. 4 cm
• Inside bowl depth: approx. 6.5 cm along the curve
• Bracket block size: approx. 3.5 cm tall by 2.7 cm wide
• Body color: red molded plastic
• Fitting: black nipple connector at the bracket outlet

Materials and Quality

The one-piece shell is molded in red plastic pigmented in the mass, so the bright surface stays glossy after months of washing. Because bowl and bracket share the same mold, the wall thickness is consistent, and the outlet around the nipple thread is reinforced. We check that the 18 g cup feels rigid without being brittle, because a shell that cracks when frozen water expands is the most common warranty claim. Sample bowls are fitted to a test pipe and run with a short water check, confirming that the nipple opens lightly and closes without weeping at the molded joint.

How to Use and Maintain

Hang the bowl on a wall rail, cage wire or short pipe at a height the birds can reach comfortably. Screw the black nipple into the bracket outlet until the washer seals. Run the water in gently and watch the first few drops fall into the center of the bowl. Weekly, unclip the bowl, rinse it with clean water, and wipe the nipple pin with a soft cloth. Because the bowl and bracket are one piece, cleaning only needs a quick rinse and a cloth wipe of the nipple. Replace the bowl if the shell cracks or the nipple outlet becomes loose on the pipe.

Applications

The one-piece bowl suits layer cages, breeding pens and grow-out houses that run nipple drinking lines and want a durable cup without clip-on parts. The printed size makes it an easy replacement, so maintenance staff can order spares without guessing. Free-range growers also use these cups in sheltered drinking stations, where the low water level keeps the supply fresh between daily visits and the one-piece design survives rough handling.

Distributors stock this bowl because the molded construction reduces customer complaints about loose brackets. The light 18 g shell packs densely, which keeps freight cost low, and the clear size reference simplifies the listing online. Hatcheries recommend the bowl to new customers, because the one-piece design is easy to install and easy to clean, which helps a first-time flock adapt quickly to nipple drinking.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this drinker, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: How is the one-piece bowl different from a two-piece cup?

The one-piece shell has the bracket molded into the bowl, so there is no separate block to clip on. This removes a common leak point and makes the cup quicker to install.

Q2: Does the bowl fit my existing nipple line?

The bracket outlet is designed for standard horizontal nipple lines. If your fitting is non-standard, send us a photo and we will confirm the match before shipment.

Q3: What causes slow dripping from the nipple?

Common causes are grit trapped inside the nipple pin, a worn seal, or water pressure that is too high. Flush the line first, then lower the regulator setting before replacing the nipple.

Q4: Can I order a sample batch before a full container?

Yes. We support trial orders and mixed container loads. Send us your target quantity and destination port, and our sales team will reply with unit pricing, packing details and lead time.