White bracket Chicken Drinking Bowl

Product Overview

The white-bracket chicken drinking bowl pairs a deep red shell with a contrasting white mounting block and a black wing-nut connector. The sample photo shows the cup from a three-quarter angle, which makes the contrast between the red bowl and the white block easy to see. The white block is the fitting part: it clips onto the bowl edge, carries the nipple outlet, and holds the whole unit against a wall rail or cage wire. The black wing nut tightens by hand, so farmers can remove the nipple during cleaning without tools.

The bowl works on the same nipple principle: a bird's beak triggers the nipple, and released water drops into the red bowl below. The low water level keeps the supply fresh and limits waste to the drops caught by the cup. The contrasting colors help maintenance staff spot the fitting during a daily walk-through, because the white block stands out against the red shell and the grey cage wire. This listing covers one red bowl, one white bracket block and one black wing-nut connector.

Key Features and Benefits

• Contrasting white bracket - The white block stands out against the red bowl and grey wire, making the fitting easy to spot during daily checks.
• Wing-nut connector - The black wing nut tightens by hand, so farmers can remove the nipple without tools when cleaning the line.
• Deep red shell - The red cup is visible at a distance and matches standard poultry drinking line color schemes.
• Nipple-triggered refill - Birds release the water themselves, so the cup stays filled without wasting water in an open tray.
• Smooth rounded inner floor - The glossy curved bottom rinses quickly and avoids dead corners where slime can form.
• Standard bracket block - The white block matches most existing drinker installations, so replacement bowls fit old and new lines alike.

Technical Specifications

• Product name: white-bracket chicken drinking bowl
• Bowl color: red molded plastic
• Mounting block: white molded plastic
• Connector: black wing nut at the nipple outlet
• Material: injection-molded plastic
• Typical use: layer cages, breeding pens and backyard flocks

Materials and Quality

The red shell is molded in plastic pigmented in the mass, so the bright surface stays glossy after months of washing. The white bracket block is a neutral grade that resists yellowing under normal coop conditions, and it snaps onto the bowl edge with a firm click. The black wing nut is checked for easy hand tightening, because a nut that needs pliers will annoy farmers during cleaning. We sample-test the outlet by fitting the nipple and running a short water check, confirming that no water seeps around the wing nut.

How to Use and Maintain

Clip the white bracket block onto the rim of the red bowl. Insert the nipple through the outlet and tighten the black wing nut by hand until the washer seals. Hang the assembled bowl on a wall rail, cage wire or short pipe at a comfortable drinking height. Run the water in gently and watch the first drops fall into the bowl center. Weekly, remove the bowl, rinse it with clean water, and wipe the nipple pin with a soft cloth. If the wing nut becomes stiff, slacken it by hand rather than using tools, and replace the nut if the thread strips.

Applications

The contrasting red and white bowl suits layer cages and breeding pens, where staff walk past many drinking points a day and need to spot a blocked or leaking cup at a glance. Hobby farmers like the look because the white block makes the fitting easy to identify when they teach new helpers how the system works. Schools and agritourism sites also use the bowl, because the two-tone design makes the drinking point easy for visitors to understand.

Distributors stock this bowl as a standard replacement, because the white block and black wing nut are common spare parts. The contrasting colors give the product a strong shelf presence, and the bowl packs flat in plastic bags, which keeps freight cost low. Hatcheries add a small quantity to trial shipments, letting new customers test the cup design on a few birds before ordering a whole drinking line.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this drinker, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: Is the wing nut and nipple included with the bowl?

The listing shows the red bowl, the white bracket block and the black wing nut as a set. If you need extra nipples or spare wing nuts, we can quote them separately.

Q2: Can I use this bowl on an existing nipple line?

Yes. The bracket block and wing nut match standard nipple fittings, so the bowl clips onto most horizontal drinking lines. If your fitting is non-standard, send a photo and we will check the match.

Q3: What should I do if water seeps around the outlet?

First slacken and retighten the wing nut by hand to seat the washer. If seepage continues, check that the washer is not cracked, and replace the washer or nipple if needed.

Q4: Do you supply larger quantities for a full house?

We supply both single cups and bulk cartons. Tell us the number of drinking points you need and your destination port, and our sales team will quote the tier price and lead time.