Duck Drinking Nipple

Product Overview

The SL-123 duck drinking nipple is an automatic drinking point designed for duck farms that run a pipe-line drinking system. When a duck pecks the stainless steel pin at the lower end of the nipple, a small amount of water is released into the bird's beak, and the flow stops as soon as the pin springs back. The nipple comes with a white snap-on clamp that fits the common round drinking pipe, so it can be clipped onto an assembled line by hand, without special tools or fittings.

The complete unit is about 8 cm long, while the clamp section measures about 3.5 cm by 2.5 cm, and each nipple weighs only 16 g. The light weight keeps the load on suspended lines low, and the bright red lower body makes the working part easy to spot during walk-through checks. One export carton holds 1000 pieces, which suits large meat-duck houses as well as smaller breeder farms that buy drinking spares in bulk.

Key Features and Benefits

• Automatic pecking action - the stainless steel pin opens when ducks drink and closes by spring return, so water only flows on demand.
• Snap-on pipe clamp - the 3.5 cm by 2.5 cm white clamp clicks onto standard round drinking pipe and fits onto existing lines without disassembly.
• Lightweight at 16 g - the low per-piece weight adds very little load to suspended drinking lines, reducing sag over long spans.
• Compact 8 cm profile - the short nipple stays close to the pipe, leaving more head room for ducks in low-ceiling houses.
• High-visibility red body - the red lower housing contrasts with white pipe, so blocked, leaking or missing nipples are found quickly.
• 1000 pieces per box - one carton covers a long stretch of line, which makes counting, stock control and container loading easy for distributors.

Technical Specifications

• Product name: SL-123 Duck Drinking Nipple
• Clamp size: approx. 3.5 cm x 2.5 cm
• Total length: approx. 8 cm
• Weight: 16 g per piece
• Packing: 1000 pieces per export carton
• Main colours: white clamp, red nipple body
• Working pin: stainless steel pecking pin with spring return

Materials and Quality

The clamp and nipple housing are made of engineering plastic that stays flexible under cold drinking water and resists the disinfectants and acids used during house cleaning. The pecking pin and internal spring are stainless steel, the parts that touch drinking water many times a day, so corrosion resistance is essential. Every nipple is tested for drip-free closing before packing, and each carton is sealed to keep the pieces clean and dry during sea freight and long inland transport. Because the clamp grips the pipe tightly, installers can adjust nipple spacing on a growing line without taking the whole drinking system apart. The red housing is also chosen so any leaky nipple stands out during a quick visual check along the pipe, which saves time during the morning rounds.

How to Use and Maintain

Open the clamp, press it onto the round drinking pipe at your chosen spacing and push until it clicks shut. Run the line at normal working pressure and flush the system before the first flock drink. During weekly checks, look for leaking pins, feed dust trapped around the clamp and hairline cracks in the housing. Replace any nipple that drips constantly, because dripping wets the litter and raises bedding moisture. At the end of a flock, soak removed nipples in clean water and confirm the pin moves freely before reusing them on the next line. Keep the line water filter clean, because grit carried in the water is the most common reason a steel pin stops closing tightly; flushing the line once a week takes only minutes and prevents most dripping problems before they start.

Applications

This nipple is fitted on suspended round-pipe automatic drinking lines in meat-duck houses, duck breeder farms and multi-species farms that also raise geese. It suits farms that already run a nipple-line system and need a low-cost replacement part instead of a whole new drinking line, as well as distributors who stock drinking spares for local farmers. The 1000-piece carton size is convenient for both end users and traders.

It works in open-sided duck houses and in closed environmental-control houses where drinking lines are raised or lowered as the birds grow. On deep-litter systems, the drip-free closing helps keep bedding dry, which supports foot pad health and lowers the risk of breast blisters during the finishing weeks when ducks spend long hours resting.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this drinker, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: Does this nipple fit my existing round drinking pipe?

The clamp is sized for the standard round poultry drinking pipe used on most automatic duck lines. If you are unsure, send us a photo of your pipe diameter and we will confirm the fit before you order.

Q2: How many nipples do I need per duck?

A common layout for growing ducks is one nipple per 8 to 12 birds, depending on house length and line spacing. Tell us your flock size and house plan, and we can suggest a layout.

Q3: Can the nipples be reused after a flock?

Yes. Remove them at cleaning time, soak them in clean water, check that the pin moves freely, and reuse them on the next flock. Only discard pieces with cracked housings or pins that no longer close tightly.

Q4: How is the order packed for shipping?

Each export carton holds 1000 pieces, and cartons are stacked or palletised according to order size, so the plastic clamps and steel pins arrive without crushing or loss during the voyage.