Numbered Ear Tags Yellow Orange Green

Product Overview

This close-up view shows three numbered ear tags in yellow, orange and green, printed with bold digits 030, 092 and 204. The image also shows how the two halves fit together: the flat tag body carries a hollow socket at the neck, and the round stud with a sharp metal pin pushes through the ear into that socket. Together they form a permanent identification seal that stays on the animal for years.

The three colors give herds a simple coding system. Yellow tags can mark one age group, orange another, and green a third, while the large black digits keep the number readable at several meters. The thick TPU material and pointed metal pin are the same construction used across our livestock ear tag range, chosen because it holds up in both hot dry pens and wet grazing ground.

Key Features and Benefits

• Large bold digits - numbers like 030, 092 and 204 are printed wide and dark, so staff can read them while walking past the animal instead of catching it.
• Three strong colors - yellow, orange and green stand out against most animal hides, simplifying group checks from a distance.
• Clear socket and stud design - the hollow neck socket and pointed metal pin are shown in detail, making assembly intuitive for first-time users.
• Flexible thick body - the TPU plate resists tearing when the animal shakes its head or rubs against rails.
• Metal pin tip - the hardened point punches cleanly through the ear, giving a neater hole than an all-plastic tip.
• Mixed color packing - orders can be split across the three colors, so one box supports several management groups at once.

Technical Specifications

• Product name: Numbered livestock ear tags, yellow, orange and green
• Sample numbers shown: 030 yellow, 092 orange, 204 green
• Colors: yellow, orange, green
• Structure: flat tag body with neck socket, round stud with metal-tipped pin
• Material: flexible TPU tag body and stud disc, metal pin tip
• Application: identification for cattle, sheep and goats
• Fitting: standard ear tag plier required

Materials and Quality

Each tag body is molded as a single flexible TPU piece with the socket neck formed in the same shot. The digits are printed in dark ink across the wide face, and the stud disc uses the same color plastic as its matching tag so pairs can be sorted at a glance. The metal pin is pressed into the center of the stud disc and sharpened at the tip so it passes through ear tissue without tearing.

Batch checks before shipment confirm that the pin sits straight in the stud, the digits are centered on the plate, and the socket opens wide enough to receive the pin head. These details matter because a crooked pin causes off-center holes, which heal poorly and raise the chance of the tag being torn out later.

How to Use and Maintain

Separate the tag body and its matching colored stud, load them into a standard ear tag plier, and place the tool over the thin, vein-free middle of the ear. Squeeze firmly until the pin head seats into the socket, then withdraw the plier. After application, inspect the tag on weekly walks: the disc should sit flat against the back of the ear. Wipe dirt off the face when needed; no further service is required. If one tag is lost during grazing, record the gap in your herd book and tag the replacement with the next spare number so the record stays complete.

Applications

These yellow, orange and green numbered tags suit medium and large cattle farms that want color group coding without buying several separate SKUs. Beef ranches use one color for calves and another for cows, while dairy farms use the third color to mark animals under treatment. The large digits also suit auction markets, where buyers read identities from the alley rather than in the handling chute.

Importers and regional distributors like this mixed color pack because it covers three common farm requests in one carton. The tags are light and nest flat, so a container holds a large number of pairs while leaving room for feeding equipment and other farm supplies in the same load.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry, livestock and farm breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about these ear tags, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: Can I order only one color from this set?

The image displays three colors together as a product view. For bulk orders, single-color packing in yellow, orange or green can be discussed, so your farm can keep one consistent color across the herd.

Q2: How large are the digits on the tag?

The sample shows large digits such as 030, 092 and 204 that cover a wide part of the tag face. Exact digit height depends on the chosen tag size; our sales team can confirm details for the model you need.

Q3: Does the tag hurt the animal when applied?

Applied correctly through the thin middle of a healthy ear with a sharp pin, the punch is a quick, minor step, similar to other routine livestock handling. Place it away from veins and let the plier complete the press in one steady motion.

Q4: Can these be used on horses and deer?

This model is designed for cattle, sheep and goats. Equine and deer work usually follows local identification rules and specific tag sizes, so check with us before ordering for those animals.