Double Card Hanging Cup for Chicken

Product Overview

The SL-137 double card hanging cup for chicken is a robust red plastic drip cup built around two side-by-side clamping rings. The two rings sit on top of a short central stem that leads down to a round bowl, giving the cup a steadier hold on the drinking line than a single clip. The design targets commercial chicken farms that need a drip cup staying in place even when the line swings.

The cup stands 14 cm tall and its round bowl measures 7.2 cm across, large enough to catch drips from an active nipple without overflowing. Each piece weighs 28 g, which signals a thicker wall than light starter cups, and the export packing holds 800 pieces per box. The bright red color keeps every cup visible during house walks, and the smooth bowl rinses quickly after each flock.

Key Features and Benefits

• Twin Clamp Rings - two clips grip the nipple or riser from both sides, reducing sideways swing and keeping the bowl aligned under the outlet.
• Sturdy 28 g Body - the heavier wall resists cracking when chickens bump the line, giving a longer service life than thin starter cups.
• 7.2 cm Round Bowl - the wider bowl handles normal drips and splashes from adult layers and broilers without wetting the litter below.
• Bright Red Visibility - red plastic contrasts with white and yellow fittings, so inspectors quickly count cups and spot missing units.
• Short Central Stem - the compact stem keeps the bowl close under the nipple, minimizing the chance that birds miss the drip point.
• 800 Pieces Per Box - export carton packing keeps shipping counts clear and supports bulk orders for large broiler projects.

Technical Specifications

• Product name: SL-137 Double Card Hanging Cup for Chicken
• Model: SL-137
• Overall height: 14 cm
• Bowl diameter: 7.2 cm
• Weight: 28 g
• Body color: red
• Material: engineering plastic
• Mounting: double clamp rings
• Packing: 800 pieces per box
• Mounting: two clamp rings side by side
• Bowl style: round 7.2 cm drip bowl

Materials and Quality

The cup is injection-molded from thick red engineering plastic with reinforced clamp rings that flex repeatedly without breaking. The bowl interior is smooth and free of sharp flash, and the stem joins the bowl with a reinforced base to avoid split corners. Every batch is sampled for drop resistance, and finished cups are visually sorted before being packed into export cartons.

The thicker 28 g wall resists the daily bumping of adult chickens better than thin chick cups, and the reinforced clamp rings keep their tension for repeated removals. The red color is consistent across production batches.

The 28 g wall thickness is chosen to survive the bumping and pecking pressure of adult chickens, and both clamp rings are molded from the same flexible plastic for a balanced grip. Red pigment runs through the wall so wear marks stay discreet during the flock. Before carton sealing, each batch is sampled for ring tension and bowl roundness, and any cups with flash or short shots are discarded. The result is a consistent spare part that integrators can order by the hundred box after box, without adjusting line practices between shipments.

How to Use and Maintain

Open both clamp rings and press them around the nipple or riser fitting, then confirm the bowl hangs level under the water outlet. Flush cups with clean water at the end of each flock, and scrub the bowl with a soft brush if mineral deposits appear. Check the rings for tension during routine line walks, and replace any cup with a cracked stem before it falls into the litter.

Open both rings, place them over the nipple or riser, and press until both click into place; a cup held by only one ring will swing and miss the drip point.

At change-out, wash the rings free of dust and feed residue, and check that the bowl interior is smooth. Cups with a cracked stem should be discarded, as the stem carries the whole hanging load.

Applications

This cup is aimed at commercial chicken farms running nipple drinking lines in broiler, layer and breeder houses. The double clamp is especially useful on suspended lines that move when birds or staff pass underneath.

It also serves poultry integrators that buy drinking-line spares in container quantities, and distributors stocking replacement cups for local farms. The cup can be ordered together with nipples, tees and float valves to form a complete drinking-line accessory set.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this drinker, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: What is the advantage of the double clamp over a single clip?

Two rings hold the cup more steadily on swinging lines, so the bowl stays directly under the nipple and catches drips more reliably.

Q2: How many cups are packed in one box?

The cup is packed 800 pieces per export carton as printed on the product label.

Q3: Is this cup suitable for adult layers?

Yes, the 7.2 cm bowl and sturdy 28 g body suit adult layers and broilers better than light chick cups.

Q4: Can the clamp fit riser pipes as well as nipples?

The twin rings are designed for standard nipple or riser mounting; send your pipe or nipple size for confirmation. Distributors can request a packing list and container plan before order confirmation.