Six Four Points Double Nipple

Product Overview

The SL-13 six four points double nipple is a yellow bracket drinker that carries two red nipple bodies side by side above a twin drip bowl. Instead of one drinking point, each bracket gives two birds access at the same time, which reduces crowding at high-density broiler and layer houses. The bracket mounts onto the horizontal drinking pipe, with both nipples fed from the same water line.

The unit spans 11.2 cm across the two nipples, stands 12 cm tall, and the twin bowl hangs 5.5 cm deep below the bracket. At 46 g, it is a sturdy combined unit that stays aligned even when several birds drink together. The double bowl catches drips from both outlets, keeping the litter under the line consistently dry across busy drinking periods.

Key Features and Benefits

• Two Drinking Points Per Bracket - twin nipples let two birds drink simultaneously, cutting waiting time and competition at high stocking densities.
• Twin Drip Bowl - the joined bowl below catches drips from both outlets in one piece, reducing the number of separate cups to maintain.
• Red Nipple Bodies - the red lower sections contain steel-ball valves with stainless pins, sealing tightly after each drink to limit drips.
• Wide 11.2 cm Span - the spacing between the two points gives side-by-side birds room to drink without bumping beaks.
• Sturdy 46 g Bracket - the reinforced yellow frame holds both nipples and the bowl level even when birds lean against the unit.
• Quick Pipe Mount - the bracket clamps onto the horizontal drinking pipe, so installation and replacement take only seconds per point.

Technical Specifications

• Product name: SL-13 Six Four Points Double Nipple
• Model: SL-13
• Overall width: 11.2 cm
• Overall height: 12 cm
• Bowl depth: 5.5 cm
• Weight: 46 g
• Bracket color: yellow
• Nipple bodies: red, twin units
• Mounting: clamp on horizontal drinking pipe
• Drinking points: two nipples per bracket
• Bowl: joined twin bowl below both outlets

Materials and Quality

The yellow bracket is molded from rigid engineering plastic that keeps both nipples aligned under water pressure. The two red nipple bodies each contain a steel ball valve and stainless steel pin, fitted and tested as a pair. The joined twin bowl is formed in one piece, with smooth inner surfaces that rinse quickly after each flock.

Every double unit is checked for balanced mounting, free pin movement and ball shut-off before packing. Batches are sampled for bracket strength, so the frame holds both points securely through long production cycles without sagging.

The yellow bracket is rigid enough to hold both nipples aligned, and the joined twin bowl avoids a seam where two separate bowls could leak. Red nipple bodies are interchangeable between brackets of the same series.

The yellow bracket is molded from rigid plastic so both nipples stay aligned even when two birds drink at the same moment. The joined twin bowl avoids a leak seam between two separate cups, and its center valley channels drips toward the middle. Red nipple bodies from the same series are interchangeable, so maintenance teams keep one type of spare on the shelf. Batches are sampled for bracket strength, and finished units are checked for free pin movement on both outlets before packing. This consistency matters on long lines, where a sagging bracket would leave one bird with an awkward reach.

How to Use and Maintain

Clamp the yellow bracket onto the horizontal pipe port and confirm both red nipples sit level above the twin bowl. Flush the whole line with clean water before first use to clear debris, and check that both pins move freely when pressed.

Rinse the twin bowl with clean water after each flock and scrub it with a soft brush if deposits build up. If one nipple drips, replace that red body rather than the whole bracket, and keep spare nipple bodies on site for fast repair.

Clamp the bracket centered on the pipe port so both nipples hang at equal height; an off-center bracket leaves one bird with an awkward reach.

When one nipple drips, swap only that red body and leave the yellow bracket in place. Clean the twin bowl after each flock, paying attention to the center valley where drips collect.

Applications

This double nipple unit suits broiler finishers and layer farms where stocking density is high and birds queue at single points. Two birds drinking together reduces stress and improves uniform water intake across the flock.

It also works in breeder sheds and pullet rearing where active flocks need more drinking access per meter of line. Distributors supply it to integrators building new houses, and it combines well with pipes, tees and float valves in complete drinking-line orders.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this drinker, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: Can two birds really drink at the same time?

Yes, the two side-by-side nipples provide separate actuation points, so two birds can drink without competing for one pin.

Q2: What happens if one nipple starts dripping?

The red nipple body can be replaced individually while the yellow bracket and twin bowl stay on the line.

Q3: Which pipe does the bracket mount on?

The clamp is designed for standard horizontal poultry drinking pipe; share your pipe size for confirmation.

Q4: Does the twin bowl collect drips from both nipples?

Yes, the joined 5.5 cm deep bowl sits under both outlets and catches drips from either point.