Piglet Feeding Trough with Guard Grid

Product Overview

The Piglet Feeding Trough with Guard Grid is a round metal feeding pan surrounded by a welded guard grid that protects the feed from the piglets' feet. The pan is made of stainless steel and has a central cone-shaped column that keeps the feed in place, while the outer guard grid, made of welded metal wire, surrounds the pan so that the piglets can reach the feed through the openings but cannot step into it. This design combines the hygiene of a metal pan with the protection of a guard, giving the farm a feeding trough that keeps the feed clean and reduces waste. The trough is intended for nursery and weaner pens, where piglets are active and feed must be protected from trampling. The guard grid is fixed to the pan with welded brackets and clips, and the whole unit is strong enough to withstand the daily activity of the piglets. The round shape and the openings in the grid allow several piglets to eat together, so the whole litter can be fed from one trough. With its sturdy metal construction and practical guard, this trough is a dependable choice for the nursery, and its durable materials mean it stays in service for many years.

Technical Specifications

The trough is manufactured from 304 stainless steel for the pan and galvanised steel wire for the guard grid. The pan has a diameter of about 340 mm and a depth of 100 mm, with a central cone rising about 120 mm above the base. The guard grid rises about 130 mm above the pan and is divided into 6 openings, each about 90 mm wide. The grid wire is 5 mm in diameter, welded at every joint, with the ends rounded for safety. The complete unit weighs approximately 4 kg. The pan holds about 4 litres of feed, and the flat base of 340 mm gives a stable footing on solid or slatted floors. The guard grid is fixed to the pan with welded brackets and stainless clips. The surface is brushed and passivated, and the unit is supplied fully assembled. Optional models include a larger pan of 400 mm and a version with a finer grid for very young piglets, and spare clips are available as replacements.

Manufacturing & Quality

The trough is produced through a controlled sequence of metal forming and welding. The pan is deep drawn from a laser-cut stainless blank, and the central cone is formed and welded to the base. The guard grid is welded on a jig from galvanised wire, with every joint checked for strength, and the grid is then fixed to the pan with brackets and clips. The complete unit is ground, cleaned, passivated and inspected for dimensions, weld quality, surface finish and the fit of the guard. A sample from each batch is tested for stability, weld strength and the resistance of the guard to displacement. Because the trough is made from welded metal with a smooth pan surface, it is very durable and easy to keep hygienic. This careful production gives the farm a trough that is consistent in quality and that will keep its shape and performance for many years of nursery use, with no loose parts or sharp edges, and with a surface that is quick to wash between batches.

Applications

This trough is used in farrowing pens and nurseries, where it is placed on the pen floor or in the creep area for the piglets. The guard grid keeps the piglets' feet out of the feed, which keeps the feed clean and reduces waste, and the central cone holds the feed in place. The openings in the grid let several piglets eat at the same time, so the whole litter can be fed together without crowding. The trough works with dry creep feed, crumble and starter pellets, and it can be combined with nipple drinkers in the same pen. Because it stands on the floor, it can be moved for cleaning and washed with hot water and disinfectant. The welded metal construction is strong and durable, making this trough a long-lasting tool for the nursery that will resist rust and damage in the humid conditions of a pig house, and that nursery staff can rely on through many production cycles.

For the farm, the guard grid can be removed for cleaning by unclipping the brackets, so the pan can be washed thoroughly between batches, and spare clips and grids are available from our factory. The unit is exported in a reinforced carton with an installation diagram, and the welded metal construction is built for rough daily use. The trough is backed by technical support from the factory, including advice on installation and cleaning. Because the grid is fixed with brackets and clips, it can be replaced without replacing the whole trough, which keeps the cost of maintenance low. With its strong construction and protected feeding surface, this trough is a dependable choice that keeps its value over a long service life.