10 kg One Piece Poultry Feeder with Legs

Product Overview

The 10 kg one-piece poultry feeder with legs is a medium-capacity gravity barrel for growers and laying flocks that need feed kept off the floor. The unit pairs a translucent white barrel with a red pan and four short red legs that lift the feeding tray about 8 cm above the ground. Overall height reaches 35 cm on a 40 cm base, the barrel measures 22 cm across the top, and each complete feeder weighs 750 g. The barrel itself is printed with the 10 kg marking so capacity is never mistaken in storage.

Raising the pan on legs serves two purposes: it keeps droppings and damp litter out of the feed, and it gives hens and growers a comfortable standing height. The translucent barrel makes refill checks simple, and the lid handle lets a farmer lift the barrel off the pan for washing. This version ships 100 pieces in three bags, a packing format that distributors find easy to handle when breaking bulk.

Key Features and Benefits

• Four-leg raised design - the pan sits about 8 cm off the floor, reducing contact with wet litter and droppings.
• 10 kg capacity barrel - long refill intervals for a flock of growing or laying birds.
• Translucent white barrel - feed level visible at a glance, supporting planned refill schedules.
• Red lid with carry handle - convenient lifting for cleaning and pen transfer.
• 40 cm wide feeding pan - generous diameter lets several birds eat side by side without tail-blocking each other.
• Packed 100 pieces in three bags - manageable carton weight for warehouse handling and retail resale.

Technical Specifications

• Product name: 10 kg one-piece poultry feeder
• Color: white barrel with red pan and red legs
• Top diameter: 22 cm
• Overall height: 35 cm
• Pan diameter: 40 cm
• Pan height above floor: about 8 cm
• Net weight: 750 g
• Feed capacity: 10 kg
• Packing: 100 pieces in three bags

Materials and Quality

The barrel uses a translucent rigid plastic that stays upright when loaded with layer pellets, while the red pan and legs use a tougher impact-resistant compound built for birds leaning on the edges. Leg joints are molded into the pan structure, so there are no separate foot parts to lose. Smooth inner walls prevent feed bridging, and the white surface makes mold spots easy to notice between flocks. Every feeder is inspected before bagging.

Leg height is kept consistent across every unit, because uneven legs would tilt the pan and cause feed to pool on one side. The translucent barrel is stiff enough that a full 10 kg load does not bow the walls, and the red lid seals the top against dust during storage.

How to Use and Maintain

Assemble by placing the barrel into the red pan and setting the four legs firmly on flat ground or a concrete pad. Pour pellets or mash through the top until the pan fills. Raise the pan off damp litter by choosing a dry spot or a low platform. Every two weeks, lift the barrel out of the pan, sweep out residual feed and rinse both parts before refilling. Check the legs sit flush after cleaning, since an uneven leg can tip the pan during heavy feeding.

If a leg sits unevenly on concrete, place a thin shim under the foot rather than tilting the whole feeder, because a tilted barrel drains feed to one side of the pan. During washing, take the barrel fully out of the pan so trapped mash dust cannot collect underneath. For wet-season farms, placing the feeder on a low raised pad further protects the pan, and the four legs keep the tray level even on soft ground.

Applications

This feeder suits free-range layer farms and grow-out houses where 20 to 40 birds share one feeding point. The leg design is also popular in areas with wet seasons, because lifting the pan keeps feed dry when the ground turns soft.

Egg farmers on medium-sized commercial farms place these units every few meters along open houses, and buyers often order the 100-piece three-bag pack to cover a whole shed renovation. Mixed container orders can combine this feeder with drinkers and nest boxes for a complete farm equipment shipment.

Egg farmers on medium commercial farms often start with a few of these leg feeders for the pullet house, then reorder the same model when they expand to the next shed. Because the leg design keeps feed off damp ground, the unit also suits farms in monsoon regions where the floor stays wet for weeks at a time.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding and drinking equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this feeder, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: Can adult chickens use this feeder comfortably?

Yes, the 40 cm pan and 8 cm raised height suit growers and laying hens; the design is sized for adult poultry rather than chicks.

Q2: Are the legs removable?

The legs form part of the red pan structure, which keeps the unit stable and avoids lost components on the farm.

Q3: What does 100 pieces in three bags mean for shipping?

The cargo is divided into three inner bags per 100 pieces, making it easier to split deliveries between buyers without repacking the whole shipment.

Q4: Is the barrel large enough for layer mash?

The 22 cm top and 10 kg capacity handle mash, pellets and crumbs alike, as long as feed is dry to avoid caking at the outlet.