25 mm to 8 mm Variable Pipe Connector

Product Overview

The SL-111 25 mm to 8 mm variable pipe connector is an orange plastic branch fitting built around an open C-shaped clamp. The clamp wraps around a 25 mm main water pipe, and a stepped barb at the bottom connects to 8 mm flexible hose that runs across to a rabbit nipple drinker. Compared with the smaller 20 mm version, this fitting is intended for farms whose drinking manifold uses a 25 mm pipe, which carries more water along longer cage rows. The product image prints a total height of 5.5 cm and a piece weight of 6 g, so it remains light even though its clamp opening is larger.

The open C-clamp design means the fitting can be snapped onto the pipe from the side without disconnecting the manifold. This style, called an alternative or variable connector in the product list, lets builders add extra drinker stations between existing ones and lets maintenance teams replace cracked fittings without draining the whole line. It is sold as a companion part to rabbit nipple drinkers, and most distributors stock both sizes because different farms choose different main pipe diameters.

Key Features and Benefits

• 25 mm pipe clamp - the open C-jaw grips a 25 mm round main pipe, matching larger drinking manifolds used on long cage rows.
• 8 mm stepped barb - the ribbed tail pushes into standard 8 mm drinking hose and holds it against pulls from curious rabbits.
• Side snap installation - the fitting clips on from the side of the pipe, so the manifold does not need to be cut or drained.
• Lightweight body - at 5.5 cm tall and 6 g per piece, it adds minimal load to the pipe run.
• Bright orange colour - easy to spot on grey pipe, which speeds up inspection and replacement during maintenance.
• Plastic and rust free - no metal is exposed to cage moisture, so the part will not corrode or jam the clip over years of use.

Technical Specifications

• Product name: SL-111 25 mm to 8 mm variable pipe connector
• Material: orange plastic
• Total height: 5.5 cm
• Weight per piece: 6 g
• Connection: 25 mm main pipe clamp to 8 mm hose barb
• Style: open C-clip alternative fitting
• Application: rabbit cage drinking line branches

Materials and Quality

The fitting is injection moulded in orange plastic with a smooth, even surface and well-formed clip edges. The C-jaw flexes just enough to snap onto a 25 mm pipe while springing back to grip tightly, and the barb ribs are uniform so each connection seats at the same depth. Plastic of this grade tolerates the damp, dusty atmosphere in rabbit sheds without becoming brittle in normal indoor conditions. Pieces are visually checked before shipment, and the single bright colour makes mix-ups with other fittings unlikely.

How to Use and Maintain

Open the C-jaw by hand, hook it over the 25 mm pipe at the desired cage position and press until it closes around the pipe. Push the 8 mm hose onto the barb until it reaches the stop. During seasonal maintenance, squeeze the clip open and pull it off the pipe to flush the branch point and remove feed dust or green algae. If the clip loses tension or shows hairline cracks, replace it with a new piece; keeping a handful of spares on site means a broken connector never stops the drinking system overnight.

Applications

This connector is used on commercial rabbit farms that run 25 mm main drinking lines, as well as on medium and small rabbitries converting bowl drinkers into nipple watering. It suits long cage batteries where one manifold feeds many cages, and it also serves as a repair part when an old clamp fails or an extension is needed toward a newly added cage section. Because it is a standard small part, it is ordered by the box rather than by the single piece.

Distributors of small-animal and poultry equipment list it alongside nipple drinkers, hose and pipe clips, and they commonly mix it into container loads headed to export markets. Farms that already run 20 mm lines elsewhere may order both the SL-47 and SL-111 versions so each manifold gets the correct branch size, and our sales team can advise on quantities for a given number of drinker stations.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this connector, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: How is this different from the 20 mm version?

The SL-111 clamp opening is sized for a 25 mm main pipe, while the SL-47 fits a 20 mm pipe. Both branch to the same 8 mm hose, so choose by the diameter of your existing manifold.

Q2: Can I install it without cutting the water pipe?

Yes. The open C-clip is designed to snap onto the pipe from the side, which is the whole point of the alternative style and the reason it is used for retrofits.

Q3: Does the hose need a clamp?

For 8 mm hose on this small barb, a firm push fit is usually enough. If your line runs at higher pressure, a small hose clip can be added for extra security.

Q4: Is it suitable for poultry drinker lines as well?

The fitting works on any compatible 25 mm to 8 mm plastic drinking line, including some poultry nipple systems, provided the pipe and hose diameters match.