Yellow Double Ring Pipe Hold Clamp

Product Overview

The SL-53 hold clamp is a yellow double-ring plastic bracket with two metal bolts, standing 10 cm tall and weighing 32 g. The two stacked rings grip two parallel pipe runs at once, keeping them aligned at the same height along the row. This type of clamp is used where the drinker water line and a second pipe or cable must run side by side without sagging.

The yellow body is molded as a two-piece ring set that closes around each pipe, and the metal bolts tighten the rings against the pipe walls. At 32 g per piece, it is sturdy enough to hold two pipes but light enough to hang from the existing line support system. It is a common sight on farms that run the drinker line together with a ventilation cable or a second service pipe.

Key Features and Benefits

• Double ring design - holds two parallel pipe runs at the same height, keeping the row tidy and aligned.
• Metal bolt tightening - bolts clamp each ring firmly so the pipes do not slide in the bracket.
• 10 cm tall body - sized to span two standard pipe diameters with even spacing between them.
• Yellow color coding - easy to spot during row inspection and maintenance walks.
• 32 g sturdy weight - strong enough for the clamping job without adding much load to the line.
• Reusable hardware - bolts can be loosened and retightened if the pipe spacing needs adjustment.

Technical Specifications

• Product name: SL-53 double ring pipe hold clamp
• Overall height: 10 cm
• Net weight: 32 g
• Number of rings: 2
• Fasteners: metal bolts
• Material: yellow engineering plastic with metal bolts

Materials and Quality

The clamp body presses from a yellow resin blend stiff enough to hold two pipes clamped side by side. The metal bolts are selected for resistance to the humid poultry house air, so they do not seize up after years of clamping. Random clamps from each batch are inspected for even ring walls and clean bolt holes before cartoning.

The yellow tone runs through the whole molding, so the clamp stays visible even in the dim corridor where the service pipe runs. We check the bolt torque feel at random during packing, so installers get a consistent grip from one clamp to the next along the row.

The two rings are hinged around a central spine, and each carries its own bolt so one ring can be loosened without disturbing the other. The bolt holes are reinforced with a thicker plastic boss, which prevents the bolt from pulling through after years of tightening.

How to Use and Maintain

Open the two ring halves, place them around the two parallel pipes, insert the bolts and tighten by wrench until each ring grips its pipe. Do not over-tighten, since the plastic rings should hold the pipe firmly without deforming it. Position the clamps at the same intervals as the line support clips along the row.

At the start of each flock, give both bolts a half-turn to confirm they are still snug, and retighten by hand if they have backed off. If a ring cracks, replace the whole clamp because the double-ring alignment depends on both sides holding evenly. Keep a few spares in the farm toolbox for quick repairs during the maintenance walk.

Open both ring halves, seat them around the two pipes, then finger-start both bolts before tightening with a wrench. Snug them alternately so the clamp closes squarely; diagonal tightening twists the body and pinches one pipe unevenly.

Applications

Wherever two pipe runs must travel together, farms reach for this clamp — the drinker line beside a service air hose, or the water line beside a cable guide. It keeps both runs at the same height and prevents one from sagging below the other.

It is also used on retrofit projects where a second pipe is added alongside the existing drinker line, because the clamp ties the new pipe to the existing suspension points rather than needing separate hangers. Distributors stock it as a mid-weight bracket that covers the most common double-pipe layouts.

Farms that run the drinker line beside a service air hose or a sensor cable use this clamp to keep both at one height. It is also used where the winch cable guide must travel parallel to the water line without sagging between supports.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this clamp, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: What does the double ring hold?

It holds two parallel pipe runs at the same height, such as the drinker line plus a service pipe or cable guide.

Q2: Do I need a wrench to install it?

Yes, the two metal bolts are tightened by wrench; the rest of the assembly is hand-positioned around the pipes.

Q3: Can I adjust the pipe spacing?

The ring spacing is fixed by the molded body, but bolts can be loosened to reposition the clamp along the row.

Q4: What if a ring cracks?

Replace the whole clamp, since the double-ring alignment depends on both sides holding evenly around the two pipes. If your two pipes sit at slightly different heights, tell us the offset and we will advise whether this clamp or a staggered pair suits the run. The two bolts tighten independently, so one pipe can be shifted along the row without unclamping the other.