High Pressure Anti Burst Filter

Product Overview

The high pressure anti-burst filter is a heavy-duty pre-filter designed for automatic poultry drinking systems where source water pressure fluctuates or peaks. Model SL-07, this unit uses a reinforced blue upper cap joined to a tall transparent housing, with a white mesh cartridge visible inside. The two side ports have an outer diameter of 25 mm, and a long black lever handle runs along the body so the cup can be twisted open by hand even when the cap is tight from pressure.

The whole unit measures 390 mm in total length, while the internal cartridge spans 100 mm, giving enough surface area to hold sediment between cleaning cycles. At 1116 g per piece and 20 pieces per carton, it is built for rough farm use rather than light household duty. A black drain fitting with a red handle at the bottom lets the operator release settled water and dirt without opening the whole cup, which makes daily flushing a one-minute job.

Key Features and Benefits

• Reinforced anti-burst cap - the thick blue cap is molded to withstand pressure surges from the house pump or water tower.

• Long lever handle - the black side lever gives extra torque, so the cup can be unscrewed by hand without a wrench.

• 25 mm barbed ports - the beige connectors push directly onto standard drinking line hose for a leak-free fit.

• Visible mesh cartridge - the white cartridge inside the transparent cup shows how much dirt has been collected.

• Bottom drain valve - the red-handled drain flushes settled sludge quickly before the weekly cleaning cycle.

• Export-grade packing - 20 pieces per carton keep shipping cost predictable for wholesale buyers.

Technical Specifications

• Product name: High Pressure Anti-Burst Filter (Model SL-07)

• Port outer diameter: 25 mm

• Overall length: 390 mm

• Filter cartridge length: 100 mm

• Weight: 1116 g

• Packing: 20 pieces per carton

• Color scheme: blue cap, transparent cup, white cartridge, black handle and drain, red valve handle

Materials and Quality

The cap and body are injection-molded engineering plastics chosen for toughness under pressure and resistance to the cleaning agents used during line sanitation. The transparent cup is formed thick enough to stay clear of cracks when the water pump cycles on and off through the day. Each unit is pressure-tested for sealing before packing, and the 25 mm barbed connectors are molded in one piece so they do not shear off under hose tension. Distributors receive every piece in a lined export carton to avoid scuffing the transparent cup during ocean transport. The blue color of the cap matches the other drinking line components from the same range, which makes installation and spare-part identification straightforward for farm maintenance crews.

How to Use and Maintain

Mount the filter vertically in the main water line, between the pressure reducing tank and the first nipple group, and push the hose fully onto the 25 mm barbed ports with a clamp if the line pressure is high. Open the bottom red drain weekly and let it run for several seconds to flush settled particles. For cartridge cleaning, use the black lever handle to twist the cup off, rinse the mesh cartridge under running water, and reinstall only when the O-ring sits flat. Replace the cartridge if the mesh becomes brittle or torn after repeated sanitizing chemicals. Always depressurize the line before opening the cup, and keep spare sealing rings in the maintenance box so a worn ring can be swapped in seconds during cleaning.

Applications

This filter suits broiler and layer houses with their own well pump or elevated water tank, where pressure spikes are common and nipple blockage is a daily cost. It is also a practical choice for breeder farms and turkey farms that run higher line pressure to reach drinkers spread over a long house.

In addition to drinking lines, the same unit can be fitted ahead of dosing pumps and cooling systems to protect sensitive valves. Because 20 units pack neatly in one carton, integrators can order one box per several houses and keep spare cartridges on site for fast swap-outs. This also makes the filter a natural upsell for distributors who already sell pressure reducing tanks and nipple drinkers, since all three parts share the same 25 mm connection size.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this filter, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: What makes this filter suitable for high pressure lines?

A: The reinforced blue cap and thick transparent housing are designed to take pressure surges, and the lever handle lets you open the cup safely after the line is depressurized. Farmers using well pumps often choose this model because it tolerates the daily on-off cycles of a house pump.

Q2: Which pipe size does it connect to?

A: The two ports have a 25 mm outer diameter, matching the common main drinking line hose used in poultry houses.

Q3: How do I clean the cartridge without tools?

A: Twist the cup using the black lever handle, rinse the white mesh cartridge with clean water, and screw the cup back on by hand; no wrench is required.

Q4: Can I order spare cartridges in bulk?

A: Yes, replacement cartridges and O-rings are available separately. Send us the model SL-07 and your monthly usage, and we will quote the spare parts set.