Short White Water Line Coupling Sleeve

Product Overview

The white short coupling is a compact sleeve for joining poultry drinker water line pipe sections when space is tight. At only 2.4 g per piece, it is the lightest joiner in the white fitting series, and its short body lets installers bridge two cut ends where a longer coupling would touch neighboring equipment. It is packed 500 pieces per bag with 25 bags per carton, reflecting its use as a quick repair and assembly part.

Unlike the 6 cm long coupling, this short version is chosen when the damaged pipe section has been cut out close to the next fitting, leaving only a small gap to bridge. The push-fit design still works the same way: pipe ends slide in from both sides and grip against the inner shoulders, keeping the line continuous with a minimum of added length.

Key Features and Benefits

• Ultra-short body - bridges small gaps between cut pipe ends where long couplings cannot fit comfortably.
• Light 2.4 g weight - adds almost no load to suspended line repairs during daily farm work.
• Push-fit sleeve ends - quick hand-pressure installation with no glue or threaded tools on site.
• Plain white finish - matches the rest of the white 1/2 inch fitting family on the supply line.
• 500 pieces per bag - high piece count suits frequent repairs and whole-house retrofits.
• Repair friendly - lets farmers fix a short cracked section without replacing long stretches of pipe.

Technical Specifications

• Product name: short white water line coupling sleeve
• Net weight: 2.4 g
• Style: short push-fit sleeve
• Packing: 500 pieces per bag, 25 bags per carton
• Material: white engineering plastic

Materials and Quality

The short coupling is molded from the same white plastic used across the supply line series, chosen for low moisture absorption and resistance to humid poultry house air. The inner bore is formed to grip the standard pipe end without sharp edges that could cut the pipe wall. Each piece is checked for clean openings and even wall thickness before packing.

Because the sleeve is short, every millimeter of gripping length is controlled carefully so the joint holds under line pressure. The plastic also tolerates mild disinfectants used during wash-down, keeping the sleeve clean inside the repair zone.

Because the sleeve is short, the two inner shoulders are positioned so each pipe end grips on nearly half the sleeve length, which gives a firm joint even when the gap being bridged is minimal. The short body also means less plastic waste per repair.

How to Use and Maintain

Cut the damaged pipe section out squarely, push the two remaining ends into the short coupling from both sides until they seat, and add a nearby support clip to take the line weight off the joint. During routine flushing, watch the repaired section for weepage, and reseat the pipe ends if they slide out.

Keep a bag of short couplings in the farm toolbox alongside spare nipples and clips, so a cracked pipe can be fixed within minutes on inspection day. Inspect the joint once a season and replace the sleeve if the grip has loosened after years of lifting cycles.

When several short repairs are done in one house, keep a tally of which rows were fixed; next season's inspection can then focus on those joints first, since a repaired coupling sees more movement than an undisturbed original. Wipe a little water on the cut pipe ends before pushing them in; a damp surface slides more easily and reduces the chance of a bent barb shoulder.

Applications

This short sleeve is the go-to repair part for cracked or cut supply pipe on layer houses, broiler houses and breeder farms, especially when the damage sits close to an existing elbow or tee. It also suits retrofit work where the new pipe must meet old pipe with little overlap room.

Distributors keep it on the shelf because short repairs happen more often than full line replacements: a single bird strike, a cleaning pole knock or a frost crack creates a small gap that only needs a short sleeve. It mixes well with long couplings in the same dealer stock so every repair situation is covered from one order.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this coupling, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: When should I use the short coupling instead of the long one?

Use the short version when the gap between pipe ends is small, for example after cutting out a short cracked section near another fitting.

Q2: Does it fit the same pipe as the long coupling?

Yes, both are part of the same white supply line series and are made for the same 1/2 inch pipe size used on the farm.

Q3: How is it packed?

500 pieces per bag, 25 bags per carton, and we can split bags for sample or small farm orders on request. Splitting a bag for a trial order is free for first-time distributors.

Q4: Can I rely on it for a permanent joint?

With properly cut square pipe ends and a nearby support clip, the push-fit joint is durable enough for routine service between planned replacements. If you are repairing a line that freezes in winter, keep the short couplings stored indoors between seasons so the plastic stays tough when used.