Large Translucent White Water Line Tee

Product Overview

This large translucent white tee is the distribution junction on poultry drinking lines, measuring 7.8 cm along the main body, 5 cm high and 2.5 cm down the branch. At 8 g per piece, it is the largest tee in the translucent white series, built for main supply runs that feed whole rows of nipple drinkers. The semi-transparent body lets staff confirm water flow at each junction without opening the line.

Three sleeves in a T-shape let the main pipe pass through while the downward branch feeds the drinker drop. It is packed 100 pieces per small bag with 3000 pieces per carton, matching the packing standard of the other large white fittings so dealers can mix them on one pallet for combined shipments.

Key Features and Benefits

• Large 7.8 cm body - gives long gripping surfaces for both main pipe ends on rigid supply lines.
• Three-way T distribution - passes main flow through while dropping a branch to the nipple line below.
• Translucent body - visible water level and air bubbles help staff diagnose pressure issues along the row.
• 8 g sturdy weight - feels solid under hand pressure and resists cracking during installation and lifting cycles.
• Push-fit sleeves - quick assembly with hand pressure, no glue or threaded tools needed on site.
• Series-matched packing - 100 pieces per small bag, 3000 per carton, easy to combine with other white fittings.

Technical Specifications

• Product name: large translucent white water line tee
• Main body length: 7.8 cm
• Overall height: 5 cm
• Branch length: 2.5 cm
• Net weight: 8 g
• Packing: 100 pieces per small bag, 3000 pieces per carton
• Material: translucent white engineering plastic

Materials and Quality

The tee is molded in translucent white plastic chosen for drinking-water contact and long service in humid poultry houses. The three sleeves are formed to consistent internal diameters so that standard pipe ends seat firmly on all sides, and wall thickness is even along the main body and branch. Each piece is checked for complete molding, clean openings and correct 8 g weight before it goes into the small bag.

Because the material is semi-transparent rather than fully opaque, staff can also watch for sediment building up inside the fitting during row inspections. The same mold standard is kept for repeat orders, so replacements match the original installation years later without rework.

The three sleeve openings share the same outer diameter as the rest of the white series, so a section of overhead supply can be repaired by swapping parts from one common dealer stock range. Random pieces are weighed at 8 g during packing, so a lighter tee in a new box usually signals a different SKU and should be checked before installation.

How to Use and Maintain

Push the two main pipe ends into the through-ports until they seat against the inner stop, then connect the branch pipe to the downward outlet and hang the drop line with matching clips. During routine flushing, run water through all three arms and look for weepage at the sleeve joints; reseat any pipe that slides out.

Inspect the tee once a season for cracks around the branch root, since this area flexes as the line is lifted and lowered. Keep a small stock of spares for quick replacement, and check the translucent interior for visible sludge at the same time as the crack inspection.

When a whole house is being re-piped, install the large tees first at the planned branch points and then run the straight pipe between them; this order keeps the 8 cm body from shifting while the rest of the line is fitted.

Applications

This tee is the main distribution piece on overhead poultry drinking systems in layer houses, broiler houses and breeder farms. It sits wherever the supply line must branch down to a row of nipple drinkers, a regulator station or a secondary manifold along the ceiling.

It is also used in retrofit projects where an existing overhead line is extended to a new section of house. Distributors stock it together with couplings, elbows and end caps so that a dealer can supply the full overhead line in one order, and the translucent body makes inspection easier for farm staff during daily rounds.

Why Choose Hebei Yilu Shunfeng Breeding Equipment

Hebei Yilu Shunfeng Breeding Equipment Co., Ltd. specializes in poultry feeding, drinking and breeding equipment for farmers and distributors worldwide. Every product is checked before shipment to ensure consistent quality, and orders are packed with export-grade packaging to protect the goods during transport. Our sales team can provide specification sheets, packing details and shipping advice for any order size. If you need more information about this tee, packaging options or mixed container loads, please contact us.

Frequently Asked Questions

Q1: How does this differ from the smaller white tee?

This large version is 7.8 cm long and 8 g, built for main supply distribution; the smaller white tees suit branch connections with less gripping length.

Q2: Can I see water flow through the body?

Yes, the translucent plastic lets you watch water movement and air bubbles inside the tee during daily inspection of the row.

Q3: How is it packed for export?

100 pieces per small bag, 3000 pieces per carton, and it can be combined with other white fittings on the same pallet. Mixed pallets are arranged before loading to keep cartons stable in transit.

Q4: What should I check during maintenance?

Look for weepage at the three sleeve joints and for cracks around the branch root, since this area flexes with line lifting and lowering. If the translucent body has turned cloudy after years of service, that is a normal sign of material aging and the tee can be scheduled for replacement at the next re-pipe.